Old Spin on New Civilization

The time has come for me to take on another challenge. I bought an antique spinning wheel made in about the mid 1700s. With it I hope to learn to spin wool and other fibres. I was reflecting on why I am attracted to the antique in everything. I know for one thing that I am in awe of how technology and processes are developed and deeply respect how my ancestors made their way in the world. My Lithuanian heritage is strong with flax spinners who would've spent all day on a wheel exactly at this one, passing their spun linen fibres off to another person sitting at a large loom. And with everything in my life it's been "The School of Hard Knocks". I seem to need to grunt and get dirty and curse and shake my head a lot; learning all the while. This 1750s wheel will be finicky I'm sure and limited as to what it can do compared to the new jewels out there. Maybe in the future I will deserve one of those new ones. For the time being, I'll walk in the footsteps left by those who went ahead of me.

Comments

  1. Granite WorktopsApril 21, 2011 at 12:57 PM

    True spirit for respecting ancestral effort and talent. hats off to you. This antique is just beautiful. I do not know how useful it will be by keeping it in your home really had create a good ambiance around.

    ReplyDelete
  2. Arctic-mermaidApril 22, 2011 at 8:51 PM

    thank you. yes it wil be very inspirational set up in my studio space.
    I am in awe of what our ancestors dis with so little!

    ReplyDelete

Post a Comment

Popular posts from this blog

Medico Loom by Leclerc

Image
Here's the newest addition to my Painted Floor Studio. This is a Medico table loom, manufactured by Leclerc, a Canadian company. Research suggests this loom was manufactured for WWII veterans to use. As such it utilizes hand levers for changing the shed. But as you can clearly see in this picture, I have the floor stand which includes six treadles, essentially making it a floor loom.  The maximum weaving width is 22 inches. When I bought this loom last week it came with the blue and white warp on there already. I decided to just play with it, getting the hang of the levers and treadles. I figured out how the previous owner had the tie-ups done, and then "went with it."  Altogether I wound up with a piece of fabric about ten feet long. I will either cut it into bits and sew small bags out of it, or maybe use most of it for a scarf. In this photo you can see the four hand levers (silver) in the top right corner of the loom. In the top centre area of the loom
Read more

What's old is new again

Image
Recently the talk of the Fiber Prep group on Ravelry is about "blending boards". It's like a drum carder, but without the drum. A flat surface covered in carding cloth. During the same week this was impressing many on Ravelry, hubby and I were in a thrift store where he spotted this! Naturally it had to come with me. (This model is not the same as what the current buzz is about.) So it is a heavy wooden box construction, with a separate handle that also has carding cloth on it. The manufacturer is Louet, a good name in spinning circles. A little vacuuming to clean out the remains from the previous owner and I was ready to roll. Here is the end on view, so you can see how the two sets of tines are proximal to one another. The batts in the back ground came off of an Ashford drum carder. And here is a view of the pegs on the handle which help to guide you in a straight path and you sweep away from yourself. In this image you can just see two wool locks
Read more

Ulla Cyrus Loom

Image
Get a look at what followed me home recently! I have gleefully adopted " Courage "  - my new addition to the family. WELCOME. The original owner of this loom was William Dyer, a famous weaver who lived in California and Washington State. He made very fine damasks with this loom.   A very large loom manufactured by Oxaback in Sweden. The model is called "Ulla Cyrus". It is a vertical countermarch with 16 shafts and 18 treadles. Plus it has the additional, optional unit draw and pattern shaft draw. Two different drawloom attachments. The weaving width is 63 inches.  I picked up this beauty in the north part of Texas, and the loom was already disassembled. This photo shows just a fraction of the gear. It was great fun to meet the current owner. Here we have returned home and both the box of the truck and the 5 x 12  landscape trailer are entirely filled with loom pieces. Completely. It is a lot of gear. And this is a glimpse at a small porti
Read more